Colorado Model Engineering Society

---

Return To Member's Page

Jerry Howell's Page

	Robert Washburn of Strictly I.C. Magazine once said about the skids under my engines "I wonder if there is any oak left in the Rocky Mountains..."
Sandhurst engine built from a Stuart-Turner castings kit. Bore is 2", Stroke is 3".
	Working scale model of Rider Pumping Engine made from my own patterns and lost-wax castings.
Middletown Machine "Woodpecker" engine built from a Richard Shelley Castings kit.
	"Nanzy" engine built from a Russel Snyder Castings kit.
"Perkins Windmill" engine built from a BeBolt Machine castings kit.
	Associated "Hired Man" engine built from a Paul Breisch castings kit.
Fibo-Craft 39" PT-109 powered by a water cooled O.S. .29 Wankel rotary engine. 109 has spotted and is going after enemy shipping!
	1/10 scale model 24 pounder cannon machined from 2" diameter brass bar stock.
"Beamer" stirling cycle engine built from bar stock and castings from my own patterns.
	"Super Stirling Fan" built from bar stock.
"Ringbom" stirling cycle engine built from bar stock.
	1/2 scale "Plunket Jr." 4 cycle gas engine built from bar stock.
"PowerHouse" 4 cycle gas engine built from bar stock.
	"Miser" low temp stirling cycle engine built from bar stock.
"Vickie" victorian style stirling cycle engine built from bar stock.
	Precision Mini Drill Press built from bar stock.
Approximately 1/3 scale "Duplex Vacuum" stirling cycle engine built from castings from my own patterns and bar stock.
	My own design 100% bar stock V-Twin engine. It has 1 inch bore and 1-1/4" stroke with 5:1 compression ratio.

Return To Member's Page